How to cut your own long bob haircut. How to cut an elongated bob yourself

The bob is a classic haircut, which, with minor changes, forms more and more new fashion trends. In order to cut a bob You don’t have to go to a salon, you can do it yourself. The main thing is a steady hand and sharp scissors.

  • Step one

Important: when pulling and cutting the strand, you should not make any effort. A straight haircut means that the hair will lie as it grows when trimmed. Pulling too hard can have undesirable results.

  • Step three

After the front area is trimmed, you need to move to the back of the head. You can use a long comb or ruler to maintain the same length throughout the haircut. Combing the back of your hair Make sure your hair is tangle-free and completely combed back. After this, without pulling the hair too much, cut a control row of hair along the perimeter of the zone (a row with a width of one to three centimeters). Now we need to move forward and return to the front zone.

Important: when cutting, the scissors must be held strictly horizontally, parallel to the floor. Otherwise the cut will be uneven.

  • Step four

Now you need to comb both occipital areas downwards. Next, using the cutting method as in the previous steps, cut the hair, moving from back to front. Repeat on the opposite side. After this, you need to trim the left and right zones in the same way, and then the left and right crown zones.

  • Step five

Last of all, you need to trim the area of ​​hair above the forehead - the front central area. Separate your hair with a straight parting. Cut the same as the previous hair.

  • Step six

After finishing the haircut, dry your hair. Use a straightening iron to style your hair until it's perfectly straight and smooth. If desired, the ends of the hair can be folded inward or outward using a curling iron or round brush. Secure the installation with varnish.

The resulting bob haircut looks elegant, stylish and trendy. A classic haircut can become the basis for many other types of bobs: with bangs, graduated, torn, asymmetrical, elongated. This is why the bob is so popular - there is a suitable bob for everyone.

Women are fickle natures; today we like one thing, tomorrow we like something else. Everyone at least once in their life has felt the desire to change something dramatically, and change it radically, and most often our innocent hair falls under the hot hand. – this is the best solution for reformers! However, it’s not always possible to visit a salon to get a haircut, but you want change more than ever! Don't be upset - creating a bob at home is not difficult.


First you need to decide on your preferred one. This choice must be made based on your facial features, the required length and, of course, the desired image. So, types of squares:

  • : single-level bob that can be worn with or without bangs;
  • :distinctive feature - the front strands are longer than the hair on the back of the head;
  • : the longest strands are at the temples. For the front hair, the “ladder” or cascade technique is used, and for the back curls, poiting is used;
  • : A characteristic feature of this image will be some dishevelment. Suitable for women with angular facial features;
  • : Characterized by a lot of hair on the top of the head and very short hair on the back of the head. Suitable for women with a beautiful neck and straight hair;
  • : Perfectly hides facial imperfections. For women with round features, oblique bangs are suitable; for women with a square shape, straight bangs;
  • : done in two layers. Very suitable for women with thin hair. Difficult to fit;
  • : performed asymmetrically on both sides. On the one hand, the required length, and on the other, a “boy” haircut;
  • :can be of any length, suitable for any hair structure;
  • bob for curly hair: any length is suitable with or without bangs;
  • “Ball” bob: this hairstyle is suitable for both diamond-shaped faces and faces with delicate features.

Step-by-step instructions for cutting a bob

You will need the following tools:

  1. Mirrors – 2 pieces;
  2. Spray;
  3. Combs with rare and frequent teeth;
  4. Clamps;
  5. Hairpins;
  6. Scissors (hot scissors and thinning scissors will help make the haircut more professional).

So, to create a haircut you need:

  • wash your hair thoroughly;
  • you need to divide your hair into 7 zones (left temporal, right temporal, front central, left part of the crown, right part of the crown, left part of the back of the head, right part of the back of the head);
  • you need to start from the front, comb a small strand down from the desired area;
  • hold the scissors parallel to the floor, cut off the desired length, which you choose yourself. When pulling a strand, you should not make any effort to get the desired result;
  • From the anterior zone, move smoothly to the occipital zone. To maintain the same length, you can use a long comb or ruler;
  • then you need to comb the back of the hair, comb it back and cut a control row of hair along the perimeter of the entire area;
  • move smoothly to the front zone. Keep the scissors strictly horizontal to maintain the correct cut;
  • comb both back of the head down;
  • use the cutting method as in the previous paragraphs, moving from back to front;
  • repeat the same on the opposite side, then move to the left and right zones, and then to the crown zones;
  • at the end, proceed to the area above the forehead;
  • After finishing the haircut, dry your hair with a hair dryer and a round comb. If desired, you can straighten them with an iron, bend the ends inward or outward;
  • Set your hair with a little hairspray.


By following these instructions, you will become a brilliant owner of a bob! Kare will give you brightness and self-confidence!

However, in addition to compliments, you will have a huge responsibility for styling: it does not tolerate lazy people.

Types of styling for bobs

  • a hairdryer and a round comb with the ends bent inward or outward - an everyday option;
  • smoothing hair with an iron - for those who want perfectly straight curls;
  • – performed using an iron or curling iron;

  • – a horizontal braid with a waterfall is possible; a braid on a Greek hairstyle or a hairstyle with various weaves in the form of accessories (feathers, beads or ribbons) looks very interesting;
  • curls – small curls look very stylish on short hair, other sizes are also great for a bob if they are in harmony with the image;
  • retro styling – this hairstyle is also called “Cold Curls”. Hairstyle in the style of Daisy from The Great Gatsby. Definitely an evening look.

You can create any of these hairstyles at home. Everything is not as complicated as it might seem at first glance!

Small curls on a bob

In order to create a beautiful look with small curls, you need to follow these steps:

  • wash your hair thoroughly;
  • Comb your hair with a wide-toothed comb;
  • Apply a styling product to your hair that is best suited for your hair type;
  • curl your hair in small curlers;
  • dry your hair with a hairdryer;
  • remove the curlers;
  • distribute the hairstyle with your hands so that it is airy (under no circumstances use a comb; use your hands to distribute the strands);
  • Fix the final result with a small amount of varnish.

Now you know that completely changing your image is not so difficult, and the result will be no worse than in the salon.

Being beautiful and bright is not at all difficult, the main thing is to really want it!

Bob and bob are two hairstyles that have been known for many years and are at the top of the ranking of fashionable haircuts. In the classic version, the bob is cut in an even line from the back of the head to the front strands and resembles a square shape. The bob is performed on this basis, the difference is that the entire volume is collected at the top of the head, and the “heaviness” is removed from the temples. Both haircuts combine lightness and femininity. And if you don't know which one to choose, choose both!


There are different variations, but they are all performed on a basic hairstyle.

First of all, you need to divide your hair into 2 parts with a vertical parting from the crown to the neck. Further work takes place in 2 stages.

Stage 1 (lower-occipital part):

  • First, make a triangular parting on the back of the head from the middle of the ears slightly upward. Mark the point of the triangle's apex, 5 cm away from the edge line of the vertical parting, and draw two diagonal lines from it. A triangle is equilateral, but the angles can be more or less acute. The sharper the figure, the longer the strands;
  • In the center of the triangle, parallel to the divided parting, a thin strand of hair is separated at a distance of 1-2 cm from the edge. It is cut at an angle of 45 degrees and is a control;
  • In the center of the back of the head on the left side, the next thin strand is separated, connected to the first and combed. The strands are cut together, the cutting and pulling angle also remains 45 degrees;
  • The haircut is carried out further strand by strand - this is what this method is called. The movement is carried out in an upward direction, from the center of the back of the head to the ears. Each previous strand will be a control for the next one. At the level of the occipital bone, it is necessary to separate the strands from one point, so the slope gradually becomes horizontal from vertical;
  • First the left side is cut, then the right, or vice versa, also from the center of the back of the head to the right, upward, to the ears. Maintain the angle of the guy;
  • the area along the line to the middle of the auricle is decorated. We do the edging and get . The whiskey remains untouched.

Stage 2 (supero-occipital and temporo-parietal parts):

  • Using a vertical parting on the outer occipital part, a strand is separated and cut at a 45-degree angle, this is a new control line. Next, thin strands are separated and cut step by step, first from the center to the left, then to the right;
  • the hair in the back of the head is simultaneously separated with the transition to the temporo-parietal region. The future shape of the hairstyle is formed along the line of the back of the head;
  • hair in the temporo-parietal zone is combed according to growth. The diagonal strands relative to the parting are separated, and the haircut line from the back of the head is extended. The strands are cut again step by step, with a pull of 0 degrees. This is necessary so as not to disrupt the integrity of the haircut;
  • the opposite side is trimmed;
  • the hair of the frontal-parietal zone is distributed in horizontal partings perpendicular to the vertical parting in the direction of its growth and is cut.
  • in order to decorate the bangs, its zone is highlighted, oriented towards the temporal protrusion;
  • the control strand is separated from the right side using a diagonal split and cut to the left. The haircut is still carried out strand by strand;
  • The bangs are combed according to the hair growth and edging occurs in a straight line.

If necessary, the haircut contour is modified. The hairstyle is ready.

Is it possible to cut a bob haircut yourself?

An easy-to-maintain haircut is considered quite complex to perform and requires professional skills to perform. If you don't have them, it's better to contact a specialist.

But if you are confident in your own abilities, you will need a set of tools to implement your plans:

  • two medium-sized mirrors;
  • a comb with more or less sparse teeth, depending on hair type and personal preferences;
  • a couple of clips or crab pins;
  • fairly sharp scissors, preferably professional ones.

Much depends not only on the skill of the person, but also on the quality of the tools he uses.

Moisten your hair before cutting. A spray bottle filled with plain water works well for this. It will be good if you use it in the future when cutting your hair.


Choose a bright, well-lit room. The mirrors need to be positioned opposite each other in such a way that you can clearly see all the work being done in the back of the head.

Haircut is performed step by step, as described in the technology above. When finished, dry your hair with a hairdryer and evaluate the result.

Curls for haircut

One of the ways to play up your hairstyle in a new way, to add romantic dreaminess or joyful enthusiasm to it is get a perm. The first thing that comes to mind with this word is curling iron. A simple and universal tool accessible to everyone.

To begin, divide your hair into lower and upper parts and use bobby pins to secure it. Separate one strand, lubricate it with a small amount of or, and then carefully twist the hair onto the curling iron rod, not reaching the roots 1 cm. Remember, the wider the strand, the larger the curl you will get. Move further so that each new curl is located under the previous one. Curl first on the bottom of your head, then on the top.

Another famous tool is iron The execution method is similar. Pin up the main part of your hair, separate a strand and run an iron through it. Don't press too hard and remember to use foam. Take the next strand and so on.

A more gentle method is curlers. They are quite varied in size and styling method: some have a thermal effect, others are worn all night.

They give different results, choose the one that suits you best. A little trick - you can use regular beer instead. Moisten washed hair with it, roll curlers and dry your hair with a hairdryer. Good beer will give a healing effect, your curls will be elastic and shiny. It is better to choose light varieties so that there is no smell.

For those who love originality, you can try styling - generously lubricate the strands with strong gel, form waves on your hair using clips, and dry your hair with a hairdryer with the hottest air possible. Secure the result with varnish.

An interesting appearance can be obtained without thermal treatment.

Do you like perm, but don't want to ruin your hair? Select thin strands on your head, spread each one with mousse and twist it onto a hairpin in a figure-eight motion, then secure with an elastic band. When you have processed all the strands, use hairspray and wait about 2 hours. Then let your hair down and fix the result.

For African curls, the procedure is similar, but instead of a figure eight, twist the hair into a tight rope and wrap it in a bun, then secure with a hairpin. Leave the strands in this position for 4 hours. Don't forget to use mousse or foam at the very beginning. Hairstyle can hold volume up to 3 days.

There are also very simple installation options. Use a foam or gel and then style your hair with a round brush while blow-drying. Or twist a thin strand into a rope and spray with hairspray. You can press lightly with your fingers to create a slight mess. Strands lying in a chaotic order will give the hairstyle a natural look.

Bob-caret is performed

The bob hairstyle assumes that the hair on the head is cut exactly along one line. The lengths of the upper and lower strands are different, but the ends of the strands are aligned along the lower edge.

The bob remains popular among women for more than a decade. Let's take a closer look at some of the options for this hairstyle and figure out how to cut a bob correctly.

A bob with a leg is a very impressive hairstyle. It is easy to do. It is enough to follow a number of rules. Below are instructions detailing how to cut your hair.

The haircut is carried out on clean hair. For convenience, they should be damp. First, you should divide your hair into four parts. To do this, we make even vertical and horizontal partings. Their intersection should be in the middle of the head. The hair of each of the resulting parts is secured with hairpins.



Step-by-step technique for cutting a bob on a leg: stage 3
Step-by-step technique for cutting a bob on a leg: stage 4


The haircut begins from the back of the head to form a leg at the base of the neck. To do this, remove the hairpins from the lower hair and make a horizontal parting in this part of the head, securing the upper strands with a clip. We cut loose hair so that a toe is formed. Do this alternately on each strand from bottom to top. The toe is cut on the hair to the line of the ears.

When the leg is ready, select a strand from the back of the head and cut it to the desired length. This will be the final length of the bob, which you need to focus on when cutting all your hair.

To get a neat haircut, separate small strands and cut each of them separately, aligning them to the base length. In this case, first cut all the hair at the back of the head, and then move on to the temporal strands. Try to keep the hair at the temples aligned with the back of the head.

At the end, the finished hairstyle can be supplemented with bangs and styled with a hair dryer.

Rules for cutting a bob haircut

The bob haircut has only one difference from the traditional bob. It consists in the graduation of curls. Graduation is used by professional hairdressers to give additional volume to the hair. based on a caret – this is . The length of the hair with this haircut reaches the middle of the ears. If desired, the hair can be longer. The basic rule on how to cut a bob is to strictly adhere to the angle of pulling the hair during the cutting process to create a graduation.

Before starting work, part your hair vertically. The haircut begins from the very bottom of the occipital zone, separating the strands in it with a horizontal parting in the shape of an equilateral triangle. The first strand should be taken from the center and cut at an angle of 45 degrees. Subsequent strands are cut based on the length of the first. After the hair of the lower occipital part, the upper occipital, temporal and frontal zones are sequentially cut.

To achieve the best result, cut your hair according to the “strand by strand” principle, which will avoid sudden changes in hair length in different areas of the head. The principle is that a new strand is applied strictly to the previous one, cut along its length and becomes the basis for subsequent strands.








How to cut a bob for lengthening

The lengthening bob hairstyle is interesting because it suits anyone. To understand how to cut a lengthening bob, you should familiarize yourself with the basic rules for performing this haircut.

Work begins by dividing the hair into two equal parts with a vertical parting. Each part should be stabbed. The haircut starts from the back of the head. At the bottom of it, separate a thin strand and cut it to the length of the desired hairstyle. Next, separate another strand about 1 cm wide with a horizontal parting, pull it at an angle of 15 degrees and cut it off. This must be done with all the hair on the back of the head up to the ear line.

Be sure to pull back all the strands and strictly observe the angle of inclination, then each subsequent strand will be slightly longer than the previous one.

Now you can start working with the hair of the temporal part. The principle of working with them is that each selected strand is pulled towards the central vertical parting and cut along the length of the occipital curls, due to which an extension is obtained. Finally, be sure to adjust the bottom hairline so that it is perfectly straight. Strands from the temples are also cut separately and pulled back. To complete the hairstyle, check the symmetry

An elongated bob is the most versatile and stylish haircut that can transform the look of any woman. It has a rich and ancient history, but still remains very relevant, popular and sexy. It has some differences from the classic bob, as it allows you to leave the length and look stylish. In the modern world, this haircut occupies a leading position among celebrities. Actresses, singers, and radio presenters prefer the long bob, taking into account the versatility, practicality and style of the haircut.

An elongated bob is a kind of calling card for girls and women. The advantage is that you can keep the length below the shoulders, make bangs, highlight individual strands and other manipulations.

Before you run to the hairdresser to get a long bob or bob, you need to know the benefits of the hairstyle. Who would suit a haircut with bangs and an elongated bob without bangs? These questions need to be sorted out before going to the hairdresser!

Characteristic features of the haircut

An elongated bob with a leg is a very stylish, fashionable and effective hairstyle that makes a woman look several years younger. What does a bob look like, and what are the main features of a stemmed hairstyle? An extended bob haircut is a symbol of femininity and beauty, emphasizing individuality. There is a huge variety of such haircuts that captivate the eye. As for the classic version, an elongated bob should combine smooth lines and a short length. Perfectly emphasizes the advantages of an oval face, making it brighter and more expressive.

An elongated bob is a rather complex haircut that requires a high level of hairdressing skill. The highlight of the hairstyle on the leg is short hair at the back of the head, and longer hair at the front. Those strands that remain long can be below the shoulders! The hairdresser must maintain smooth transitions from the front to the back strands. This trick will open up your face, highlight it, and also expose your neck. It should be remembered that a long bob does not suit all representatives of the fair sex. You need to take into account the features and shape of your face, as well as the length of your neck, to make your look attractive and stylish. Neglecting advice is fraught with spoiled appearance and lack of style.

  • So, who would suit an elongated bob with a stem? An elongated bob suits all face types perfectly, taking into account the various variations and cutting technologies for such a hairstyle:
  • if a girl has a square face, then a hairstyle without bangs will suit her;
  • round face shape - no bangs, bob for wavy hair;
  • As for an oval, thin and narrow face, in this case, a graduated bob with a stem suits girls. The advantage of a haircut is the creation of volume at the back;

A triangular face shape goes well with an asymmetrical hairstyle. The asymmetrical shape is suitable for those who have a wide forehead and a very narrow chin. In this case, the strands in the front will be longer and will remain below the shoulders;

The technology has been a classic for many years. Every year, various fashion variations and trends are introduced into it, which can change the style beyond recognition. Many hairdressers follow the strict scheme of the classic version, but stylists and masters of their craft try to introduce a new idea, a twist.

To make an elongated hairstyle on a leg, follow the instructions:

  1. Hair should be thoroughly washed and combed. Then make a vertical parting, maintaining symmetry.
  2. Pin up the top strands.
  3. They start cutting from the back of the head. Work is carried out with the lower strands, and then with the upper ones. As a result, the master makes a ladder in which the top layer of hair is 3-4 cm longer.
  4. After working with the back of the head, the master makes a horizontal parting to work on the strands in front. The technology is similar to the lower curls.
  5. If there is bangs, they are cut last. One triangular strand is collected and a cut is made to a specific length.
  6. Styling is done with a hairdryer.

To make it more clear, the wizard’s algorithm of actions is presented step by step with photographs:

1. The hair needs to be divided as shown in the photo.

2. Perform a haircut - from the lower strands! Take the main strand located in the left section. Its thickness should not exceed 8 millimeters. Comb it thoroughly, then make a clear cut that will be parallel to the parting. Similar actions are performed with the right side. As a result, you can get the main strand to control the angle and length of the hairstyle.

3) Remove the pins from the remaining curls at the back of your head. Comb it.

4) Take a curl in the center, pull it out and make a cut. The cutting angle is about 45 degrees. After completing the manipulation, you will receive a second control curl.

5) Hair cutting in this area continues in the same way, maintaining a 45-degree cut and maintaining a right angle tension. Try to harmoniously form an extension on the temporal region, pulling the curls towards the second control strand. Then proceed to the top of the back of the head. Take a curl, pull it, keeping it at a right angle. Cut at a special angle - 90 degrees. Try to focus on the main parting (vertical). As for the third control curl, it should be the longest of all. You need to use it to align the remaining hair on the top of your head, gradually increasing the length.

6) Temporal curls are cut to the back of the head, then edging is done at the temples at an angle. The parietal zone is divided into two parts, cut from short to long hair to obtain a kind of lengthening.

7) Comb thoroughly and thin with special scissors. Remove the mass, but try to maintain the length of the outline.

8) A bob haircut is suitable with or without bangs, it is important to take into account the shape and features of the face! If you stick to the classic version, it involves the presence of bangs of various variations.

A long bob is a stylish, sexy and versatile haircut. She is able to emphasize the advantages and hide various imperfections of the face. It is important to find a good hairdresser to trust him and his skill!

Share